Quiz Summary
0 of 155 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 155 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Residential Estimating and Drawing Interpretation 0%
- Safety and Building Materials 0%
- Site Preparation, Building Layout, Foundation and Floor Frame Systems 0%
- Tools 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 155
1. Question
____ plans start at the finished floor elevation and stop at the ceiling.
CorrectIncorrect -
Question 2 of 155
2. Question
An ____ line is used to show the non hidden shape edges.
CorrectIncorrect -
Question 3 of 155
3. Question
A t-square is the best tool for ____.
CorrectIncorrect -
Question 4 of 155
4. Question
On a print the abbreviation “BS” means ____.
CorrectIncorrect -
Question 5 of 155
5. Question
On a print the abbreviation “TYP” means ____.
CorrectIncorrect -
Question 6 of 155
6. Question
On a print the abbreviation “WA” means ____.
CorrectIncorrect -
Question 7 of 155
7. Question
On a print the abbreviation “RO” means ____.
CorrectIncorrect -
Question 8 of 155
8. Question
Of the following pencil types, which is the darkest and softest grade?
CorrectIncorrect -
Question 9 of 155
9. Question
9B refers to the ____.
CorrectIncorrect -
Question 10 of 155
10. Question
The effort arm length compared to the resistance arm length is considered a(n) ____ type of advantage of a lever.
CorrectIncorrect -
Question 11 of 155
11. Question
If your length is 3600 mm and your height is 1200 mm, then your diagonal is ____ rounded to the closest millimeter?
CorrectIncorrect -
Question 12 of 155
12. Question
A floor plan can include the following. Select all that apply (4/5)
CorrectIncorrect -
Question 13 of 155
13. Question
An actual 5 ft wall measures 1.25 inches on an imperial print. The scale the print uses is ____ equals one foot.
CorrectIncorrect -
Question 14 of 155
14. Question
A three point drawing is used to show objects as ____.
CorrectIncorrect -
Question 15 of 155
15. Question
The 12% deposit on a circular saw is $21.48. What is the full price of the saw?
CorrectIncorrect -
Question 16 of 155
16. Question
The length of a diagonal used to square a building 25 feet by 41 feet is ____ feet.
CorrectIncorrect -
Question 17 of 155
17. Question
Which of the following are included on a roof plan? Select all that apply (4/5)
CorrectIncorrect -
Question 18 of 155
18. Question
If not reinforced, a ____ joint is the weakest type of joint.
CorrectIncorrect -
Question 19 of 155
19. Question
A joint that enables the horizontal and vertical movement between two adjacent but separate members is called a ____ joint.
CorrectIncorrect -
Question 20 of 155
20. Question
The best definition of sub base is ____.
CorrectIncorrect -
Question 21 of 155
21. Question
The best definition of sub grade is ____.
CorrectIncorrect -
Question 22 of 155
22. Question
A stamped certification mark must be present on all materials used on a ____.
CorrectIncorrect -
Question 23 of 155
23. Question
Concrete blocks are available in sizes based on ____ mm increments.
CorrectIncorrect -
Question 24 of 155
24. Question
____ are available in sizes based on 200 mm increments.
CorrectIncorrect -
Question 25 of 155
25. Question
What is the maximum slump allowed for a concrete footing?
CorrectIncorrect -
Question 26 of 155
26. Question
The ____ allowed in a concrete footing is 150 mm.
CorrectIncorrect -
Question 27 of 155
27. Question
A builder must first consult a plot plan during the ____.
CorrectIncorrect -
Question 28 of 155
28. Question
Loads resulting from the occurrence of temperature changes are an example of a(n) ____ load.
CorrectIncorrect -
Question 29 of 155
29. Question
Regular joists are floor joists that ____.
CorrectIncorrect -
Question 30 of 155
30. Question
Driveways and sidewalks that endure freeze/thaw cycles should use ____ concrete.
CorrectIncorrect -
Question 31 of 155
31. Question
On the PWF certification stamp “L/B P/C CCA 1101”, which letters and/or numbers identify the preservative used?
CorrectIncorrect -
Question 32 of 155
32. Question
Compression is the opposite of ___.
CorrectIncorrect -
Question 33 of 155
33. Question
A block used to align the form bottom is called a ____.
CorrectIncorrect -
Question 34 of 155
34. Question
Which of the following are true about headers. Select all that apply (4/5)
CorrectIncorrect -
Question 35 of 155
35. Question
A concrete slab on ____ foundation is thickest on the outside perimeter.
CorrectIncorrect -
Question 36 of 155
36. Question
A telepost supporting a beam is an example of a ____ load.
CorrectIncorrect -
Question 37 of 155
37. Question
The certifying agency for lumber in Canada is ____.
CorrectIncorrect -
Question 38 of 155
38. Question
The purpose of edge forms used for concrete sidewalks are which of the following? Select all that apply (2/5)
CorrectIncorrect -
Question 39 of 155
39. Question
For a building that is 8900 wide by 11500 long with a 3 ply beam of 45 mm LVL material centered on the width. The floor system is anchored using a ladder at the top of a 200mm thick foundation wall. The clear span of the joists that are butted together over the beam rounded to the nearest millimetre is ____.
CorrectIncorrect -
Question 40 of 155
40. Question
The National Building Code includes information on the following. Select all that apply (4/5)
CorrectIncorrect -
Question 41 of 155
41. Question
An anchor bolt must have a thickness of no less than ____ mm in the foundation wall for a floor attachment frame.
CorrectIncorrect -
Question 42 of 155
42. Question
A(n) ____ must have a thickness of no less than 12 mm in the foundation wall for a floor attachment frame.
CorrectIncorrect -
Question 43 of 155
43. Question
To identify sanitary sewers, ____ is the international colour code used.
CorrectIncorrect -
Question 44 of 155
44. Question
Green is the international colour code used to identify ____.
CorrectIncorrect -
Question 45 of 155
45. Question
Copper chrome arsenate is most commonly used to treat ____.
CorrectIncorrect -
Question 46 of 155
46. Question
____ stress can cause the lengthening of an object.
CorrectIncorrect -
Question 47 of 155
47. Question
Every time joists are doubled, ____ must be used.
CorrectIncorrect -
Question 48 of 155
48. Question
When using hardware fasteners on a permanent wood foundation, all fasteners must be ____.
CorrectIncorrect -
Question 49 of 155
49. Question
____ is added to concrete to control the chemical reaction of the concrete with soil.
CorrectIncorrect -
Question 50 of 155
50. Question
Interior non-load bearing masonry walls need a minimum footing of 200 mm wide for walls up to ____ m.
CorrectIncorrect -
Question 51 of 155
51. Question
Interior non-load bearing masonry walls need a minimum footing of ____ mm wide for walls up to 5.5 metres.
CorrectIncorrect -
Question 52 of 155
52. Question
What is the maximum nail spacing in mm for subfloors nailed at intermediate supports?
CorrectIncorrect -
Question 53 of 155
53. Question
For proper support of wood frame structures, the top of grade beam elevation is required to be a minimum of ____ cm above the finished soil.
CorrectIncorrect -
Question 54 of 155
54. Question
For proper support of wood frame structures, the top of grade beam elevation is required to be a minimum of 28 cm above the ____.
CorrectIncorrect -
Question 55 of 155
55. Question
A concrete footing that supports a load bearing wall is called?
CorrectIncorrect -
Question 56 of 155
56. Question
The cutting blade will rotate in a(n) ____ during normal operation of a router.
CorrectIncorrect -
Question 57 of 155
57. Question
The best router for delicate inlay work is a ____ router.
CorrectIncorrect -
Question 58 of 155
58. Question
____ firing in an air nailer requires a release and squeeze of the trigger each time it is fired.
CorrectIncorrect -
Question 59 of 155
59. Question
When using an explosive actuated tool on steel, fasteners should not be driven closer than ____ mm from each other.
CorrectIncorrect -
Question 60 of 155
60. Question
When using an explosive actuated tool on ____, fasteners should not be driven closer than 50 mm from each other.
CorrectIncorrect -
Question 61 of 155
61. Question
The piston is protected by the ____ in an explosive actuated tool.
CorrectIncorrect -
Question 62 of 155
62. Question
Explosive actuated tools are designed to work with the following materials. Select all that apply (3/5)
CorrectIncorrect -
Question 63 of 155
63. Question
In order to create a flat surface on a board, a ____ should be used.
CorrectIncorrect -
Question 64 of 155
64. Question
A side view of a cross cut saw will usually show ____ points per inch.
CorrectIncorrect -
Question 65 of 155
65. Question
A side view of a ____ will usually show 8 points per inch.
CorrectIncorrect -
Question 66 of 155
66. Question
Compressed air has the following characteristics. Select all that apply (4/6)
CorrectIncorrect -
Question 67 of 155
67. Question
Hard Arkansas is a type of stone used to create a ____ edge on knives and woodworking tools.
CorrectIncorrect -
Question 68 of 155
68. Question
An explosive actuated tool should never be used on which equipment? Select all that apply (3/5)
CorrectIncorrect -
Question 69 of 155
69. Question
When using an explosive actuated tool with concrete, the fasteners should never be closer together than ____ mm.
CorrectIncorrect -
Question 70 of 155
70. Question
When using an explosive actuated tool with ____, the fasteners should never be closer together than 75 mm.
CorrectIncorrect -
Question 71 of 155
71. Question
In pneumatic tools the abbreviation ____ represents how much air can move per minute.
CorrectIncorrect -
Question 72 of 155
72. Question
The lowest power level of an explosive actuated tool listed is ____.
CorrectIncorrect -
Question 73 of 155
73. Question
Nail guns can be powered by the following. Select all that apply (4/5)
CorrectIncorrect -
Question 74 of 155
74. Question
A ____ plane is used for one handed fitting and smoothing.
CorrectIncorrect -
Question 75 of 155
75. Question
The blade of a plane is called a plane ____.
CorrectIncorrect -
Question 76 of 155
76. Question
When using an explosive actuated tool the fastener point should penetrate ____ mm beyond the steel base material?
CorrectIncorrect -
Question 77 of 155
77. Question
When using an explosive actuated tool the fastener point should penetrate 6 mm beyond this base material?
CorrectIncorrect -
Question 78 of 155
78. Question
A 1/4 inch coupler and nipple can only be attached to an air tool equipped with a ____ inch air outlet.
CorrectIncorrect -
Question 79 of 155
79. Question
An explosive actuated tool needs to be used on low velocity in order to be ____.
CorrectIncorrect -
Question 80 of 155
80. Question
A laminate trimmer with a ____ is best for trimming corners.
CorrectIncorrect -
Question 81 of 155
81. Question
Which sandpaper grit is often used between coats of paint or varnish?
CorrectIncorrect -
Question 82 of 155
82. Question
A 200-400 grit sandpaper is best for ____.
CorrectIncorrect -
Question 83 of 155
83. Question
What is the RPM of a drywall screw gun?
CorrectIncorrect -
Question 84 of 155
84. Question
6000 RPM is the best speed for ____.
CorrectIncorrect -
Question 85 of 155
85. Question
The grit of sandpaper most often used in tools is ____.
CorrectIncorrect -
Question 86 of 155
86. Question
24-36 is a grit of sandpaper most often used for what application?
CorrectIncorrect -
Question 87 of 155
87. Question
Which of the following are radial arm saw styles? Select all that apply (3/5)
CorrectIncorrect -
Question 88 of 155
88. Question
Which of the following are not radial arm saw styles? Select all that apply (2/5)
CorrectIncorrect -
Question 89 of 155
89. Question
A taper may form if the outfeed table on a jointer has been adjusted to be ____.
CorrectIncorrect -
Question 90 of 155
90. Question
A ____ blade has flat top grind chippers and should never be used without both outside blades.
CorrectIncorrect -
Question 91 of 155
91. Question
Referring to a hollow grind chisel, the primary bevel has an angle of ____ degrees.
CorrectIncorrect -
Question 92 of 155
92. Question
The primary bevel on ____ chisel has an angle of 30 degrees.
CorrectIncorrect -
Question 93 of 155
93. Question
Red represents the ____ charge on an explosive actuated tool.
CorrectIncorrect -
Question 94 of 155
94. Question
A cove cutter is a router bit that creates a ____ edge.
CorrectIncorrect -
Question 95 of 155
95. Question
____ is a term used describe the process of straightening the edges of lumber.
CorrectIncorrect -
Question 96 of 155
96. Question
Referring to an all purpose twist drill bit, the lip clearance is ____ degrees.
CorrectIncorrect -
Question 97 of 155
97. Question
Twelve degrees is the ____ clearance angle for an all purpose twist drill bit.
CorrectIncorrect -
Question 98 of 155
98. Question
A bevel edge chisel would be chosen for ____.
CorrectIncorrect -
Question 99 of 155
99. Question
On a circular saw blade the space between the teeth is referred to as a _____.
CorrectIncorrect -
Question 100 of 155
100. Question
Classified as one of six classical simple machines, a ____ converts rotational motion, called torque, into up and down force.
CorrectIncorrect -
Question 101 of 155
101. Question
A ____ line is used to keep a load from twisting in a single leg swing during hoisting.
CorrectIncorrect -
Question 102 of 155
102. Question
A machine offset is best described as a ____.
CorrectIncorrect -
Question 103 of 155
103. Question
Self-sealing screws are best used for ____.
CorrectIncorrect -
Question 104 of 155
104. Question
Respirator face pieces are in which Class of CSA protection?
CorrectIncorrect -
Question 105 of 155
105. Question
Class 7 CSA eye protection includes ____.
CorrectIncorrect -
Question 106 of 155
106. Question
Which of the following is true about kiln dried lumber? Select all that apply (4/5)
CorrectIncorrect -
Question 107 of 155
107. Question
Which of the following are characteristics of balsam fir? Select all that apply (4/5)
CorrectIncorrect -
Question 108 of 155
108. Question
SPF grade lumber is made from which of the following? Select all that apply (3/5)
CorrectIncorrect -
Question 109 of 155
109. Question
____ is a mixture of a deep red syrup and a light brown powder.
CorrectIncorrect -
Question 110 of 155
110. Question
A ____ scaffold is not an acceptable type of scaffold.
CorrectIncorrect -
Question 111 of 155
111. Question
The average drying period for lumber is ____.
CorrectIncorrect -
Question 112 of 155
112. Question
The shortest possible drying time for lumber is ____.
CorrectIncorrect -
Question 113 of 155
113. Question
The heartwood of a tree is used by the tree for ____.
CorrectIncorrect -
Question 114 of 155
114. Question
A properly designed concrete mixture contains 10-15% cement, 60-75% aggregate and ____ water.
CorrectIncorrect -
Question 115 of 155
115. Question
A properly designed concrete mixture contains 10-15% cement, ____ aggregate and 15-20% water.
CorrectIncorrect -
Question 116 of 155
116. Question
A properly designed concrete mixture contains ____ cement, 60-75% aggregate and 15-20% water.
CorrectIncorrect -
Question 117 of 155
117. Question
A properly designed concrete mixture contains which of the following? Select all that apply (3/5)
CorrectIncorrect -
Question 118 of 155
118. Question
What are the basic components in concrete? Select all that apply (3/6)
CorrectIncorrect -
Question 119 of 155
119. Question
Which of the following is true about stainless steel fasteners? Select all that apply (4/5)
CorrectIncorrect -
Question 120 of 155
120. Question
Face shields are in which Class of CSA protection?
CorrectIncorrect -
Question 121 of 155
121. Question
Class 6 CSA eye protection includes ____.
CorrectIncorrect -
Question 122 of 155
122. Question
To find evidence of ambrosia beetles look for ____ in lumbar.
CorrectIncorrect -
Question 123 of 155
123. Question
Which of the following are imperfections in wood? Select all that apply (4/5)
CorrectIncorrect -
Question 124 of 155
124. Question
An MSDS for a controlled product must not be more than ____ years old.
CorrectIncorrect -
Question 125 of 155
125. Question
An up to date ____ shall never exceed three years.
CorrectIncorrect -
Question 126 of 155
126. Question
Which of the following are characteristics of red oak? Select all that apply (4/5)
CorrectIncorrect -
Question 127 of 155
127. Question
Porosity, strength, durability and an open grain are characteristics of ____.
CorrectIncorrect -
Question 128 of 155
128. Question
In reference to a portable fire extinguisher, what does the acronym PASS stand for? Select all that apply (4/5)
CorrectIncorrect -
Question 129 of 155
129. Question
The PASS acronym applies to the ____.
CorrectIncorrect -
Question 130 of 155
130. Question
How often do rigging components need to be inspected?
CorrectIncorrect -
Question 131 of 155
131. Question
Examples of administrative controls are as follows? Select all that apply (4/5)
CorrectIncorrect -
Question 132 of 155
132. Question
A test to measure the consistency of freshly mixed concrete is referred to as a ____ test.
CorrectIncorrect -
Question 133 of 155
133. Question
A test to measure the ____ of freshly mixed concrete is referred to as a slump test.
CorrectIncorrect -
Question 134 of 155
134. Question
____ cells radiate out horizontally from the centre of a tree outwards.
CorrectIncorrect -
Question 135 of 155
135. Question
Concrete discharge must be complete within ____ minutes of mixing.
CorrectIncorrect -
Question 136 of 155
136. Question
____ should be poured within 1.5 hours of being mixed.
CorrectIncorrect -
Question 137 of 155
137. Question
Concrete that will be exposed to ____ cycles, is recommended to have air entrainment.
CorrectIncorrect -
Question 138 of 155
138. Question
Concrete that will be exposed to freeze-thaw cycles, is recommended to have ____.
CorrectIncorrect -
Question 139 of 155
139. Question
____ are a type of tree that shed their leaves.
CorrectIncorrect -
Question 140 of 155
140. Question
A mitre joint is considered to be ____ degree joint.
CorrectIncorrect -
Question 141 of 155
141. Question
A ____ joint is considered to be 45 degree joint.
CorrectIncorrect -
Question 142 of 155
142. Question
A float base angle of ____ degrees to the hydraulic cylinder shaft is needed when setting up outriggers.
CorrectIncorrect -
Question 143 of 155
143. Question
A ____ angle of 90 degrees to the hydraulic cylinder shaft is needed when setting up outriggers.
CorrectIncorrect -
Question 144 of 155
144. Question
The first line of defense when fighting fires is ____.
CorrectIncorrect -
Question 145 of 155
145. Question
The elimination of a hazard is an example of ____.
CorrectIncorrect -
Question 146 of 155
146. Question
The angle between the legs of a sling and a horizontal plane is referred to as a ____ angle.
CorrectIncorrect -
Question 147 of 155
147. Question
____ film is commonly used as a protective vapour barrier in applications.
CorrectIncorrect -
Question 148 of 155
148. Question
A 9/16 inch diameter rope requires ____ U-bolt clip(s).
CorrectIncorrect -
Question 149 of 155
149. Question
A ____ nail has a thin shaft with a small or non-existent head.
CorrectIncorrect -
Question 150 of 155
150. Question
Which of the following wires of rope has the least wires per strand?
CorrectIncorrect -
Question 151 of 155
151. Question
How are dangerously reactive materials classified under WHMIS?
CorrectIncorrect -
Question 152 of 155
152. Question
On the job site, it is the responsibility of the workers to inspect their own PPE equipment ____.
CorrectIncorrect -
Question 153 of 155
153. Question
Scaffolds need to be designed to be capable of safely supporting ____ times the load that may be imposed on it.
CorrectIncorrect -
Question 154 of 155
154. Question
____ need to be designed to be capable of safely supporting four times the load that may be imposed on it.
CorrectIncorrect -
Question 155 of 155
155. Question
The design and construction of a scaffold needs to be able to hold at least ____ times the maximum weight required for the job.
CorrectIncorrect